How to program Xfinity remote? Different Methods
Whenever you lose or damage your Xfinity remote, you need to buy a new one and program it with your TV channel. Even if you have bought a new Xfinity TV set-top box, you need to program the remote with it to control the TV with the remote. There are various ways; How to program Xfinity remote with TV.
So, we will find out these methods of programming the remote with Xfinity TV. Furthermore, the blog will further cover how we can program different remotes to the same TV.
Different methods about How to Program Xfinity Remote with TV:
Before you air up any remote device with Xfinity TV, you need to define which remote you are using. Besides this, do check out whether remote support voice programming or not. Because there are two methods of Programming the remote with or without voice programming. We will now discuss each method with a step-by-step guide so that it is easy for you to follow those steps.
Voice-Controlled Remote:
If you are looking to program the remote that is voice controlled with your Xfinity TV, You need to follow the steps that we will discuss below;
- First of all, make sure your TV and set-top box is powered on.
- Now, hold your remote and point it in the direction of the Set-top box. Now, put your finger on the Microphone button on your remote.
- The Set-top box will be ready to listen to your voice command. Simply just say “Program Remote.” After listening to this command, the Set-top box will direct the command to the TV and the TV will show your certain instructions.
- Keep following the instructions that are read on your Xfinity TV screen. Within 2 minutes, your remote will be programmed with the TV. You can control your TV now with the help of your voice-controlled remote.
Set up Button Remotes:
Now, we will go through the procedure of How to program Xfinity remote that does not support microphone features with your Xfinity TV.
- Starting with powering on your TV and set-top box like you did before for the voice-controlled remote.
- Direct the remote towards the set-top box and press the “Set-up” button on your remote for a long time until the light of Re light from the Set-top Box turns to Green.
- Now, when you notice that the light has turned green, you need to press the button of 9 two times and then press the 1 button after that.
- In the next step, you have to press the buttons “Channel” and “+” at the same time for so long that your TV turns.
- As soon as your TV is switched off, quickly press the “Set-Up” button on your remote. This will actually lock up the code of your TV with the remote.
- Finally, switch on your TV and start controlling it with your remote. That is all for setting up a remote without a voice option.
Programming remote with Xfinity My Account app:
Now, we will discuss the setting up and programming of remote with the Xfinity remote with the help of the My Account app for Xfinity TV users.
- First of all, Download and Sign Up for the My Account application. This app is available on both operating system devices like iOS and Android.
- After doing so, log in to this application after signing up. Provide the necessary details that you gave while signing up for this account.
- Once you sign in, you need to track the icon of the TV in that application. By clicking on it, you will have to look for the TV Box option.
- Now, you have to click on the TV Box option and choose the “Set-up Remote” option.
- You will see a variety of remotes that can be programmed with Xfinity TV. So, select the one that you have with that TV. Next, press the “Continue” option after choosing the type of remote you have.
- Now, with the help of that app, you can select the TV and remote that are programmed with each other. This was among the procedures on How to program Xfinity remote.
How to set up XR1 Remote with Xfinity TV?
XR1 remote is available in both the Set-up button and microphone control options. We will discuss both methods in detail.
Setting up XR1 with the Set-up Button of Remote:
So, programming this remote with Xfinity TV is only possible through the Set-up button that you will find on this Remote.
- First of all, make sure, you have placed the cells in the remote. Now, direct the remote towards the TV set-top box and press any button to see whether it is working or not.
- Now, press the “Set-up” button on the remote.
- On the TV Screen, you will see your TV instructions asking you to permit the remote to control your Xfinity TV. Select the “Yes” option on the screen and move forward.
- In this step, you have to enter a code on your TV screen. However, you can get this passcode from the Remote Control Code Lookup Page.
- After placing the code, select OK and start controlling the TV from your remote. If the process does not work, keep trying with new passwords.
Setting Up XR1 with Voice Control:
For Voice Control, you can directly follow the procedure of How to program Xfinity remote that we already discussed in the above section. There is no difference in setting up this remote with that procedure.
How to Program XR15 Remote with Xfinity TV?
XR15 can be programmed with the Set-up button on this remote.
Set-up Button Programming:
- To get started, make sure your television is turned on and keep the Xfinity TV Box remote within reach.
- Now, simultaneously press and hold the Xfinity and Mute buttons for a few seconds.
- Once you notice the LED Indicator light change color from red to green, you can release the buttons.
- Next, navigate to the Remote Code Lookup page to locate the precise code for your particular TV model.
- If you have entered the correct code, you will see the green light flash twice. On the other hand, an incorrect code will cause the light to blink alternatingly between red and green.
- After identifying the correct code, simply press the Power button on your remote control.
- If your TV powers off and both volume and mute functions operate properly, then your setup is complete.
- However, if pressing power fails to turn off your television, it might be necessary to attempt a different code or use an alternative method of programming your remote for your TV.
How to Program XR16 Remote with Xfinity TV?
XR16 remote is programmable with the Voice control feature this remote has.
Voice control Remote:
- First of all, switch on your TV and Set-top box and place the battery cells in the XR16 remote.
- Point the XR16 remote in the direction of the set-top box and press the button on the Microphone. Now, command the remote by saying “Program Remote.”
- Next, The TV screen will show you some instructions that you have to follow for setting up the remote voice control.
- Once, you followed all those details, that is it. Your XR16 remote is programmed with the Xfinity TV.
FAQs
Q. How do you program one for all remote without codes?
For doing so, you need to install the One for All Remote application on your device. Next, open this application on your device, and after signing up and signing in, search for your TV device in this application. Once you find your device, You can access various codes that you can use for programming your remote to your TV. This application is available for both iOS and Android devices.
Q. How do I pair my Xfinity Remote?
We have briefly described the pairing procedure of How to program Xfinity remote with your TV. For this purpose, you can use the Setup button procedure or microphone option. By using a voice control method, you have to press the microphone button on the remote and follow the instructions on your TV screen. For, the setup button, you need to manually select the options and follow the instructions on the TV screen. For further details, you can read this blog.
Q. Where is the setup button on my Xfinity TV remote?
The setup button is usually present on the Top right side or bottom left side of the remote. However, there are certain remotes that do not have this button, so you can use the microphone button for setting up the remote with the TV.
Q. What are the 5-digit remote codes for Xfinity?
Here is a list of 5-digit codes that you use for Xfinity TV remote setup and programming.
- Panasonic (10250, 10051)
- LG (11265, 10178)
- Toshiba (11156, 10156)
- Vizio (11756, 11758)
- Sony (11100, 10000)
- Samsung (10060, 10812)
Final Thoughts:
One can easily set up the remote with his TV with the help of more than one method. We completely discussed the various processes of how to program Xfinity remote with your TV. Furthermore, we thoroughly discussed the method of programming different remotes (voice-controlled or Set -up button) with Xfinity TV.